Using Optional Equipment; Auxiliary Audio Equipment; Marine Remote Commander Rm-X11M - Sony CDX-M20 Mode D'emploi

Using optional
equipment
Auxiliary audio
equipment
By connecting an optional portable audio
device to the AUX input jack (stereo mini
jack) on the unit and then simply selecting
the source, you can listen on your speakers.
Connecting the portable audio device
1
Turn off the portable audio device.
2
Turn down the volume on the unit.
3
Connect the portable audio device to the
unit with a connecting cord (not supplied)*.
* Be sure to use a straight type plug.
Adjusting the volume level
Be sure to adjust the volume for each
connected audio device before playback.
1
Turn down the volume on the unit.
Press  repeatedly until
2
"AUX" appears.
3
Start playback of the portable audio device
at a moderate volume.
4
Set your usual listening volume on the unit.
5
Adjust the input level (page 13).
Marine remote
commander RM-X11M
Location of controls
The corresponding buttons on the marine
remote commander control the same
functions as those on this unit.
RM-X11M
VOL +/–
OFF
GP/ALBM
–/+
The following controls on the marine
remote commander require a different
operation from the unit.
• VOLUME (VOL) +/– button(s)
The same as the control dial on the unit.
• GP/ALBM –/+ button(s)
Radio:
To receive stored stations.
MODE
SEEK –/+
SOURCE
15