Metz MECABLITZ 58 AF-2 digital Mode D'emploi page 120

Camera without integrated flash unit
• Press the Sel key repeatedly until "Select" appears on the display.
• Use the and keys to select the menu item "Remote".
The selected menu item will be highlighted with a dark bar.
• Press the Set key to confirm the selection of "Remote".
• Use the and keys to select "Remote Slave" for Slave Mode or
"Remote OFF" to deactivate Remote Mode.
The setting will take effect immediately
• Press repeatedly until SLAVE appears on the display. If the
not pressed, the display will automatically switch back to SLAVE after
approx. 5 seconds.
• The slave flash unit then automatically recognises the "CTRL" or "CTRL "
function.
120
CTRL mode
Camera with integrated flash unit
which does not support "CTRL "
• Mount the flash unit which is to be used as slave on the camera
• Set camera to "WL" mode
• Press the shutter release,
- the flash unit switches automatically to "SLAVE"
• Remove flash unit from camera and set up as slave. The desired mode "TTL"
(automatic in RMT or RMT2) or "M" (with partial lighting levels) can now be
set on the slave flash unit.
key is
• Fold out the camera's own flash unit
+
+