Technical Data - Güde BX 710 Mode D'emploi

Minimum Age
No special limits by age apply to this machine. Use is related to the body height and strength of the user.
Training
Use of the unit requires adequate lesson by a professional or the use of the manual only . Special training is not required.

Technical Data

Input power:
Motor output power
Speed
Impact rate
Quick clamping chuck
Drilling output
Cable length
Vibrations a
w
Acoustic pressure level LP
Acoustic power level LW
A
Ordering number.:
Initial Operation Safety Instructions
- Wear eye and ear protectors.
- Before boring a hole in the wall, check the area with metal detector for electrical, water or gas lines.
- Unplug the unit before changing the drill/chuck!.
- The worked piece must be secured (vised, e.g.) to avoid injuries
- Do not let the motor stop for overload in the course of drilling/screw driving.
- Observe general safety instruction for handling electrical tools.
Operation
Switching on:
Continuous use:
Switching off:
Left/right run:
The speed may be selected by various pressure on the switch (12) or pre-selected with the speed control (11).
Wood and Metal Drilling
Put the mode selector (13) on „Drilling" and the Rotational Direction Switch (10) on „Right". Select the speed with button (11).
Stone and Concrete Drilling
Put the mode selector (13) on „Impact" and the Rotational Direction Switch (10) on „Right". Select the speed with button (11and start
with low speed.
Driving Screws
Put the mode selector on "Drilling" and the Rotational Direction Switch (10) on „Right" for screwing up and Left for screwing out. Select
the speed with button (11) and start with low speed.
.
Operator Safety Instructions
•
Do not use the machine until you have read the instruction manual carefully.
•
Observe any safety instructions included in the manual.
• Be responsible to the others
BX 710
230 V~50 Hz
810 W
0-2900 rpm.
0-52200 /min
2-13 mm
steel 13 mm
stone 13 mm
wood 32 mm
3 m
2,5 m/s
92,5 dB(A)
A
103,5 dB (A)
58020
Press switch (12).
Press on-off switch (12) and retain with locking button (2).
Pres and release on-off switch (12).
to be selected with on-off switch 10).
2
10