Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
7. Check the oil seal and replace it if it is damaged in any way.
Oil seal
8. Replace the dipstick and screw it firmly into place.
Caution! Do not tighten the screw too tightly, since this may
damage the oil seal or the thread in the cylinder cover.
Fig. 10
Fig. 11
When should I change the oil?
The first oil change should be carried out after 50 operating
hours, and then every 250 operating hours.
Changing the oil:
1. The log ram must be in its starting position.
2. Place a container under the log splitter to catch the old oil.
The container should have a capacity of at least 4 litres.
3. Unscrew the dipstick. Do not drop or lose the oil seal when
removing the dipstick.
4. Now tip the machine to empty the oil into the container.
5. Stand the log splitter on end, with the filler opening at the top.
Fig 10.
A second person will be required to up-end and hold
the log splitter.
6. Pour in the new hydraulic oil (2.7 or 3.2 litres) using a clean
funnel.
7. Clean the dipstick and the oil seal.
8. Check the oil seal and replace it if it is damaged in any way.
9. Replace the dipstick and screw it firmly into place.
Dispose of the old oil properly (local oil disposal point). The
old oil must not be poured into the ground or drainage
system, or mixed with other waste.
We recommend the following hydraulic oils for the hydraulic
cylinder:
Do not use any other types of oil. The use of any other type
of oil will adversely affect the operation of the hydraulic
cylinder.
Please observe the enclosed terms of guarantee.
Dipstick
Please refer to the drawing for spare parts.
Ordering spare parts:
-
-
Example: 360431, 1, Log splitter, ASP 5-520 N
16
Caution! Do not tighten the screw too tightly, since this may
damage the oil seal or the thread in the cylinder cover.
Hydraulic oil
Shell Tellus T 22
Aral Vitam Gf 22
BP Energol HLP 22
order no. 400142 (1 litre)
Mobil DTE 11
or equivalent
G
u
a
r
G
u
a
r
S
p
a
r
e
S
p
a
r
e
available from the manufacturer
orders must quote the following information:
• spare parts no.
• quantity required
• model
• name of the model
a
n
t
e
e
a
n
t
e
e
p
a
r
t
s
p
a
r
t
s
Publicité
Chapitres
Table des Matières
