Adjusting The Display; How To Adjust - Sharp LL-171ME Mode D'emploi

You can adjust the colour of the computer screen
image and make picture-in-picture settings using
menus for the PC mode.
Adjustment Pattern
If you are using Windows, you can use the
Adjustment Pattern on the accompanying
CD-ROM.
This explanation is for Windows 95/98/2000/Me/
XP, and assumes that the CD-ROM drive is "D"
drive.
1. Load the accessory CD-ROM into the CD-ROM
drive of the computer.
2. Open [My Computer] and select CD-ROM.
If using Windows 3.1, open [File Manager] and
choose "D" drive.
3. Double click on [Adj_uty.exe] to run the
Adjustment Programme.
The Adjustment Pattern will appear.
Adjustment Pattern
After completing the adjustments, press the
computer's [Esc] key to exit the Adjustment
Programme.
Note:
- If your computer's display mode is set to 65K
colours, you may see the different colour levels
in each colour pattern or the gray scale may look
coloured. (This is due to the specification of the
input signal and is not a malfunction.)

Adjusting the display

How to adjust

The following procedure describes the basic
operation method. See pages E23 through E25
regarding individual items.
1. Select the PC mode using the INPUT button
2. Display the MENU screen using the MENU
3. Select the menu you want to set using the
4. Select the item you want to set using the MENU
5. Change the numbers/values using the
6. Exit the screen using the INPUT button
Notes:
- If you do not press any buttons for about 30
- This manual describes display adjustment
E22
(monitor) or the PC button (remote control).
button.
MENU
ADJUSTMENT
GAIN CONTROL
COLOUR CONTROL
MODE SELECT
PICTURE IN PICTURE
MENU button (monitor) or the
(remote control), and press the
OK/BRIGHT MODE button (monitor) or the
OK button (remote control).
button (monitor) or the
control), and press the OK/BRIGHT MODE
button (monitor) or the OK button (remote
control).
buttons (monitor) or the
(remote control).
You can continue to set other items.
Do the following to return to the previous
screen:
(1) Select "RETURN" using the MENU button
(monitor) or the
(2) Press the OK/BRIGHT MODE button
(monitor) or the OK button (remote control).
(monitor) or the MENU button (remote control).
seconds while in a menu screen, the settings
you made up to that point will be applied and
the screen will automatically disappear.
based on the use of the Adjustment Pattern (for
Windows).
< >
PC
>>
>>
>>
>>
>>
buttons
buttons (remote
buttons
buttons (remote control).