Product Design - SPORTSTECH STX300 Mode D'emploi

Cushioning
Non-slip feet
Pull strap
Place the 4 caps on the ends of the main frame
so that the feet are aligned with the ground
and ensure a secure stand.

3. PRODUCT DESIGN

Towing rope
Attach the snap hooks of the two pull straps to the
designated eyelets.
With the adjusting screw on the bottom you can influence
the intensity of the training.
The resistance and the step height adjust from low to high.
Turn the adjusting screw clockwise to increase the
resistance.
26
Pedal
Hydraulic cylinders
Pull strap eyelet
Training computer
Magnet
Magnetic sensor
Main frame