Martin Logan Motion Vision X Manuel De L'utilisateur page 31

defeated. Some televisions will allow you to
turn off the internal speaker via the television's
menu system. Other televisions may require you
to turn the television's volume to "zero" or to
"mute" the television.
The soundbar is too quiet even when
the soundbar is turned up
• Check that the output on your television or
other source components are not connected via
a variable level output. Sometimes this option
may be configured in your source components
menu. Please refer the manual for the source
component in question.
Soundbar won't learn remote codes from
aftermarket remote
• Review the "Menu Option: Learn" section of
this manual.
• Hold the remote 12 inches (30 cm) from the
soundbar during the learning process.
• Press the appropriate button on the second
remote four times.
• There may be remote controls that the soundbar
cannot learn or that the soundbar can not learn
correctly. Due to the number of available remote
controls, it is impossible to advise which will or
will not work.
• Check the user manual and/or manufacturer's
web-site for your aftermarket remote to see if
MartinLogan is supported. If so, instead of
'learning' with the soundbar, use the code
provided by the manufacturer to program the
aftermarket remote itself.
Soundbar remote won't work
• Replace the remote control's batteries with
matching batteries.
• If new batteries do not fix the problem, you
may have a faulty remote. Call MartinLogan
customer service at 785-749-0133 for details.
When using an aftermarket remote, the
soundbar turns off when the television
turns on
• Turn the television on. Manually press the
Power button on the soundbar so that both
the soundbar and television are both on at the
same time.
No sound coming from external sub
• Check that the external sub is turned on.
• Check that the soundbar is configured for a
wired or wireless subwoofer connection. Refer
to the "Subwoofer Connection" section of this
manual.
• If utilizing a wired connection, check that the
subwoofer cables are attached to the Sub Out
connection on the soundbar and to the appro-
priate input on the subwoofer.
• If utilizing a wireless connection, attempt to
re-sync the wireless connection. Refer to the
"Subwoofer Connection" section of this manual.
• If utilizing a wireless connection, move the sub-
woofer closer to the soundbar.
• Turn the soundbar off and on using the remote
control or the top panel power button.
• Unplug the sound bar, wait 30 seconds, and
plug it back in.
External sub is too quiet
• Turn up the volume on the subwoofer.
• Adjust the bass level setting in the soundbar
menu system.
• Try moving the subwoofer to a different loca-
tion in the listening room.
My soundbar is not behaving as expected.
• Turn the soundbar off and on using the remote
control or the top panel power button.
• Unplug the sound bar, wait 30 seconds, and
plug it back in.
31