Martin Logan Motion Vision X Manuel De L'utilisateur page 21

a o
n vervIew oF tHe
SUB [subwoofer, select subwoofer configuration]
|
–› * NO.SUB [no sub, select when not using a subwoofer]
†
|
– › WIRED [wired, select when attaching a subwoofer via a cable]
|
– › WIRELS [wireless, configure when using a wireless subwoofer]
|
–› SYNC [sync, select to begin syncing wireless subwoofer]
|
– › TRN.OFF [turn off, select to deactivate wireless transmitter]
BASS .LV [bass level, adjust bass level]
|
–› +10 [increases bass output by 10dB]
|
– › +8 [increases bass output by 8dB]
|
– › +6 [increases bass output by 6dB]
|
– › +4 [increases bass output by 4dB]
|
– › +2 [increases bass output by 2dB]
|
– › * 0 [normal bass level]
†
|
– › –2 [decreases bass output by 2dB]
|
– › –4 [decreases bass output by 4dB]
|
– › –6 [decreases bass output by 6dB]
|
– › –8 [decreases bass output by 8dB]
|
– › –10 [decreases bass output by 10dB]
INSTAL [install, select installation location]
|
–› * ON.SHLF [on-shelf, select when set on a flat surface]
†
|
– › ON.WALL [on-wall, select when mounted to a wall]
SURRND [surround, configure surround options for 5.1-channel sources]
|
–› +6dB [on: +6dB, increases level of simulated surrounds]
†
|
– › *0dB [on: 0dB, use simulated surrounds]
|
– › OFF [off, turns off simulated surrounds]
STEREO [stereo, configure options for 2-channel stereo sources]
|
–› WIDE [wide, creates a wider stereo image]
|
–› * VOICE+ [voice plus, simulates a center channel for stereo sources]
†
|
– › NORMAL [normal, use original stereo signal]
MODES [modes, select EQ listening mode]
|
–› BASS+ [bass plus mode, sets EQ mode for enhanced bass]
†
|
– › *NORMAL [normal mode, returns EQ to normal levels]
|
– › NIGHT [night mode, sets EQ mode for night listening]
DISPLY [display, select display mode]
|
–› BRIGHT [bright, use full display brightness at all times]
†
|
– › DIM [dim, use dimmed display at all times]
|
– › *AUTO.BR [auto bright, display turns off automatically]
|
– › AUTO.DM [auto dim, display turns off automatically]
POWER [power, configure power on/off behavior]
|
–› * AUTO [auto, soundbar turns itself off and on as needed]
†
|
– › FULL.ON [full on, the soundbar is always powered on]
** Some menu options may vary depending on manufacturing date.
m s
enu tructure
LEARN [learn remote codes for second remote control]
|
–› VOL+ [volume up, program to respond to second remote]
|
– › VOL– [volume down, program to respond to second remote]
|
– › MUTE [mute, program to respond to second remote]
|
– › NX.INPT [next input, program to respond to second remote]
|
– › PR.INPT [previous input, program to respond to second remote]
|
– › UP [up, program to respond to second remote]
|
– › DOWN [down, program to respond to second remote]
|
– › LEFT [left, program to respond to second remote]
|
– › RIGHT [right, program to respond to second remote]
|
– › ENTER [enter, program to respond to second remote]
|
– › NITE.MD [night mode, program to respond to second remote]
|
– › NRML.MD [normal mode, program to respond to second remote]
|
– › BASS.MD [bass+ , program to respond to second remote]
|
– › PWR.TGL [power toggle, program to respond to second remote]
|
– › PWR.ON [power on, program to respond to second remote]
|
– › PWR.OFF [power off, program to respond to second remote]
|
– › MENU [menu, program menu to respond to second remote]
|
– › OPTIC [optical input, program input to respond to second remote]
|
– › COAX [coaxial input, program input to respond to second remote]
|
– › ANALOG [analog input, program input to respond to second remote]
|
– › PLAYFI [Play-Fi , program input to respond to second remote]
|
– › ERASE [erase, clear programmed codes for second remote control]
|
–› CONFRM [confirm factory defaults, choose YES or NO]
SRC .NAM [source name, assign new names to inputs]
|
–› OPTIC [digital optical, assign a new name for this input]
|
– › COAX [digital coaxial, assign a new name for this input]
|
– › ANALOG [analog, assign a new name for this input]
SERVCE [service, advanced controls]
|
–› FRMWRE [firmware, display firmware version]
|
– › RESET [reset soundbar to original factory settings]
|
–› AT.HOME [at home, factory defaults for home use]
|
|
–› CONFRM [confirm factory defaults, choose YES or NO]
|
– › STORE [store, factory defaults for in-store use]
|
–› CONFRM [confirm factory defaults, choose YES or NO]
*AT.HOME: Factory default setting, home use.
STORE: Factory default setting, in-store use.
†
**
21