Technical Data; Beverage Preparation; Appliance Description - Krups EA815 Mode D'emploi

TECHNICAL DATA

Automatic Espresso
Appliance:
Series EA81xx
Electrical power
120V ~/60Hz
supply:
Energy During operation:
consumption:
1450 W
Water tank:
57 oz (1.7l)
Under reserve of technical modifications.

APPLIANCE DESCRIPTION

A Water tank lid
B Water tank
C Coffee drawer
D Used grounds collector
E Coffee outlet and height-adjustable handle
F Grid and removable drip tray
G Coffee bean container lid
Coffee bean container
H Coffee grounds fineness adjustment knob
I Metal conical burr grinder
J Cleaning tablet funnel
Further information on:
The drip tray: allows you to collect water or coffee. It must always be left in the same place.
Coffee drawer: allows you to collect excess ground coffee.
!
Important: read these instructions carefully and keep for future use.
Please follow the safety instructions.
Manufacturer
SAS GSM
Rue Saint-Léonard
F-53104 Mayenne
France
26
Coffee grounds
0.55 lbs
tank:
Pump pressure: 15 bars
First use and
indoors, in a dry place
(free from frost).
storage:
Dimensions
15x11x19 inches
(H x l x P) :
Weight EA81xx:
15 lbs
K Cup tray
L Water level float
2 Graphic screen
M On/off button
N Coffee and favorites button
O Steam button
P Settings button
Q Navigation button
R + or - button
S Start/stop button
T Steam nozzle

BEVERAGE PREPARATION

Number of
TYPES OF Possible settings
possible
COFFEE
Volume (ml)
cups
1 20 to 30 ml (per 10 ml)
RISTRETTO
2 x 20 to 30 ml (per 10 ml)
2 x 1
In two cycles
1 40 to 70 ml (per 10 ml)
ESPRESSO
2 x 40 to 70 ml (per 10 ml)
2 x 1
In two cycles
1 80 to 180 ml (per 10 ml)
COFFEE
2 x 80 to 180 ml (per 10 ml)
2 x 1
In two cycles
BEVERAGE PREPARATION
Caution: use of oily, caramelized or aromatic coffee beans is not recommended in this appliance. KRUPS
recommends using medium roasts as those beans will create a bolder flavor and release all the aromas of
the coffee.
Caution: make sure that any foreign objects such as small stones in the coffee bean bag do not enter the
hopper. Those foreign objects could cause clogging or damage the grinder which will be excluded from
KRUPS warranty.
Information on recipes
Depending on the recipe selected, your KRUPS Fully Automatic Espresso Machine EA81XX will
automatically adjust the quantity of ground coffee.
Appliance preparation
To prevent used water spillage from making your counter dirty and to avoid burning yourself, don't forget to
attach the drip tray.
Remove and refill the water tank fig.1-2.
Refill the coffee bean container fig.3.
First use
Turn on the appliance by plugging it in then pressing the on/off button
The machine pre-heats. At the end of the cycle, the symbols
Rinsing circuits
Put a 0.6L (21 oz) container underneath the two coffee and steam nozzles.
Press the start/stop button fig.5. The machine starts and rinses the hydraulic circuits (coffee and steam)
for around 2 minutes. At the end of the initialization cycle, the coffee types menu appears fig.6.
You are advised to rinse the circuit if you have not used your machine for several days (see the chapter on
Maintaining Your Appliance).
Preparing the grinder
You can adjust the strength of your coffee by adjusting the size of the ground coffee. Usually, the finer the
coffee grounds the bolder the taste and the thicker the crema, however this depends on the type of coffee
used.
Possible settings Possible settings
Volume (oz) Strength
0.7 to 1 oz
1 to 3 beans
2x0.7 to 1 oz (per 0.33 oz)
In two cycles
1 to 2.3 oz (per 0.33 oz)
1 to 3 beans
2x1 to 2.3 oz (per 0.33 oz)
In two cycles
2.7 to 6 oz (per 0.33 oz)
1 to 3 beans
2x2.7 to 6 oz (per 0.33 oz)
In two cycles
fig.4.
and start button start to flash.
27