Before Washing - Horeca Select GGW1001 Mode D'emploi

6.1 Before washing

Use only detergents and rinse-aids for industrial dishwashers.
Do not use detergents intended for hand washing.
It is recommended to use products which were designed especially for this dishwasher.
During the loading of the tanks, be careful not to switch products as this could provoke dishwasher
malfunction and damage.
Do not mix different detergents together as this could damage the metering unit.
Detergents for industrial dishwashers can cause serious irritations. Take care to respect the instructions
provided by the detergent's manufacturer related on the packaging.
Open the
The levels of
water supply
detergent and
tap
rinse-aid in the
(usage).
containers.
LOADING GLASSES:
Remove eventual solid residues from the glasses (peels, cores, etc.).
Position the glasses upside down.
SILVERWARE
Use the appropriate basket. It is preferable to arrange large amounts of silverware with the handles facing down,
taking care to avoid injury from fork prongs and knife blades.
6.2 First daily use (tank and boiler empty)
The manual's panel and the graphics could
show functions not present on your machine.
Verify:
The correct positioning of the filters, the rotation of
the sprinklers, the absence of foreign objects
within the dishwasher.
Turn on the wall switch, open the door insert the over
flow pipe, close the door:
Pushing the on/off button
lights up, the tank and boiler will fill with water.
Once the tank and boiler are filled the boiler warning
lamp lights up
Load the rack
Wait for the boiler warning lamp
To start up the wash cycle push the cycle button
Actions and what happens
, the warning lamp
Turn off the main
switch usage
turn off.