Installation And Positioning - Horeca Select GGW1001 Mode D'emploi

INSTALLATION AND POSITIONING

Bring the dishwasher to its installation location, remove its packaging and verify the integrity of the apparatus
and of its components. In case of damage, written notification must be sent to the transporter.
The packaging elements (plastic bags, polystyrene foam, nails, etc) must not be left within range of children and
domestic animals as they are a potential source of danger.
All of the materials used for packaging are compatible with the environment. They may be safely preserved, or
may be disposed of at an appropriate waste disposal facility.
The components in plastic material subject to eventual disposal through recycling are marked in the following
manner:
PE polyethylene: external wrapping, instructions bag, protection bags.
PP polypropylene: straps.
PS polystyrene foam: protective corners, packaging cover.
The wood and cardboard components can be disposed of by respecting the norms in regulations in place.
When disposing of the product, do not abandon it in the environment; its disposal must respect the regulations in
place. All of the metallic parts are in stainless steel and are detachable.
The plastic parts are marked with the symbol of the relative material.
POSITIONING:
Warning: the internal system and the locations in which communal apparatus are to be installed,
must comply with all regulations in place.
The manufacturer declines any responsibility for direct damages to persons of things deriving from lack of
respect for the said norms.
Prior to installation, verify that objects and materials which could be damaged by aqueous vapor or by spray
from washing solutions are not in the proximity, or are adequately protected.
Position the dishwasher in the desired position and remove the protective wrapping.
Level the dishwasher (with the help of a spirit-level) on its four feet, adjusting them in such a way so as to
guarantee stability; any alternate solution must be approved by the manufacturer.
2 INSTALLATION AND POSITIONING