Specific Safety Information; Drain Cleaner Safety; Ridgid Contact Information; Description - RIDGID POWER SPIN+ Mode D'emploi

Specific Safety
Information
WARNING
This section contains important safety
information that is specific to this tool.
Read these precautions carefully before
using the POWER SPIN +™
Cleaner to reduce the risk of electrical
shock or other serious personal injury.
SAVE ALL WARNINGS
AND INSTRUCTIONS FOR
FUTURE REFERENCE!
Keep this manual with machine for use by
the operator.

Drain Cleaner Safety

• Always use safety glasses and leather
work gloves in good condition while
handling or using. Use latex or rubber
gloves, face shields, protective clothing,
respirators or other appropriate protective
equipment when chemicals, bacteria or
other toxic or infectious substances are
suspected to be present to reduce the risk
of infections, burns or other serious per-
sonal injury. Wear latex gloves or rubber
gloves under leather gloves.
• Practice good hygiene. Use hot, soapy
water to wash hands and other body parts
exposed to drain contents after handling or
using drain cleaning equipment. Do not
eat or smoke while operating or handling
drain cleaning equipment. This will help
prevent contamination with toxic or infec-
tious material.
• Do not use with a corded drill. Operating
with a corded drill increases the risk of elec-
trical shock.
• Do not allow the end of cable to stop
turning while the machine is running.
This can overstress the cable and may
cause twisting, kinking or breaking of the
cable and may result in serious personal in-
jury.
• Position machine within 4" (10 cm) of
the drain inlet or properly support ex-
posed cable when the distance exceeds
4" (10 cm). Greater distances can cause
control problems leading to twisting, kinking
or breaking of the cable. Twisting, kinking or
breaking cable may cause striking or crush -
ing injuries.
POWER SPIN is a registered trademark of RIDGID, Inc. in the U.S.
POWER SPIN + ™ Drain Cleaner
• Do not wear loose clothing or jewelry.
Keep your hair and clothing away from
moving parts. Loose clothing, jewelry or
hair can be caught in moving parts.
• Do not operate this machine if operator
or machine is standing in water. Oper -
ating machine while in water increases the
risk of electrical shock.
™
Drain
• Only use drain cleaner to clean drains
of recommended sizes according to
these instructions. Other uses or modify-
ing the drain cleaning machine for other
applications may increase the risk of injury.
• Read and understand these instruc-
tions, the battery drill instructions and
the instructions for any other equip-
ment used with this tool before operat-
ing. Failure to follow all instructions may re-
sult in property damage and/or serious in-
jury.
The EC Declaration of conformity (890-011-
320.10) will accompany this manual as a sep-
arate booklet when required.
RIDGID Contact
Information
If you have any question concerning this
RIDGID
– Contact your local RIDGID distributor.
– Visit RIDGID.com to find your local
RIDGID contact point.
– Contact Ridge Tool Technical Service
De part ment at rtctechservices@emer -
son.com, or in the U.S. and Canada call
(800) 519-3456.

Description

The RIDGID
is used to clean drain lines such as bathroom
and kitchen sinks, bathtub and shower drains.
It features RIDGID MAXCORE
positively retained in the drum to prevent cable
pullout. It is equipped with the AUTOFEED
mechanism that advances and retrieves the
cable with just the pull of a trigger while the
drum is rotating. The POWER SPIN + Drain
Cleaner can be operated either manually or
driven with a battery powered drill.
The POWER SPIN + is not recommended for
use with toilets.
® product:
POWER SPIN + ™ Drain Cleaner
®
® Cable that is
®