Wolf icbwwd30 Instructions D'installation page 5

W O L F WA R M I N G D R AW E R
I N S TA L L AT I O N R E Q U I R E M E N T S
IMPORTANT NOTE: This installation must be
completed by a qualified technician.
Installer: Please read the entire Installation
Instructions prior to installation. Save these
instructions for the local inspector's refer-
ence, then leave them with the homeowner.
Homeowner: Please read and keep these
instructions for future reference and be sure
to read the entire Use & Care Information
prior to use.
Any questions or problems about the
installation should be directed to your Wolf
dealer. You can also visit our website
at wolfappliance.com.
IMPORTANT NOTE: This appliance must be
installed in accordance with local codes. The
correct voltage, frequency and amperage must
be supplied to the appliance from a dedicated,
grounded circuit which is protected by a
properly sized circuit breaker or time delay
fuse. The proper voltage, frequency, and
amperage ratings are listed on the product
rating plate.
Location of
rating plate
Rating plate location
Record the model and serial numbers before
installing the warming drawer. Both numbers
are listed on the product rating plate, located
on the left front floor area of the inner cabinet.
To access the rating plate, the drawer must be
fully open. Refer to the illustration below.
Model Number ICBWWD30
Serial Number
Model ICBWWD30
with Stainless Steel
Drawer Front
Model ICBWWD30
with Integrated
Drawer Front
5