Wolf icbwwd30 Instructions D'installation page 21

I N S TA L L AT I O N I N S T R U C T I O N S
T R O U B L E S H O O T I N G
IMPORTANT NOTE: If the warming drawer
does not operate properly, follow these
troubleshooting steps:
Verify that power is being supplied to the
warming drawer.
Check electrical connections to ensure that
the installation has been completed
correctly.
Refer to the Troubleshooting Guide in the
Wolf Warming Drawer Use & Care
Information.
If the warming drawer still does not work,
contact your Wolf dealer or regional distrib-
utor. Do not attempt to repair the warming
drawer yourself.
The information and images are the copyright
property of Wolf Appliance, Inc., an affiliate of
Sub-Zero, Inc. Neither this book nor any informa-
tion or images contained herein may be copied
or used in whole or in part without the express
written permission of Wolf Appliance, Inc., an
affiliate of Sub-Zero, Inc.
©Wolf Appliance, Inc. all rights reserved.
I F Y O U N E E D S E R V I C E
For service in your area, contact either your
Wolf dealer or visit the Locator page of our
website, wolfappliance.com to find the
regional distributor by country.
When calling for service, you will need the
model and serial numbers of the warming
drawer. Both numbers are listed on the
product rating plate, located on the left
front floor area of the inner cabinet. To
access the rating plate, the drawer must
be fully open. Refer to the illustration on
page 5.
C O N TA C T
I N F O R M AT I O N
Website:
wolfappliance.com
21