Wolf icbwwd30 Instructions D'installation page 10

W O L F
I N T E G R AT E D
I N S TA L L AT I O N S P E C I F I C AT I O N S
The following illustrations provide the overall
dimensions and installation specifications for
the Wolf warming drawer with integrated
drawer front. The warming drawer with inte-
grated drawer front can be used in an overlay
application or an inset panel application where
it will be completely recessed in to the cabinet.
Keep in mind that the size of the custom panel
for the warming drawer with integrated drawer
front will vary according to the specific instal-
lation. The following chart provides minimum
dimensions for the overlay and inset panel
applications.
Refer to pages 18–20 for integrated drawer
front installation instructions. These instruc-
tions are also included with the integrated
drawer front kit.
Overall Dimensions – Integrated Drawer Front
Integrated Drawer Front – Overlay Application
10
WA R M I N G D R AW E R
D R A W E R F R O N T
M O D E L I C B W W D 3 0
with Integrated Drawer Front
Overall Width
Overall Height
Overall Depth* (behind frame)
Minimum Cabinet Requirements
Overlay 838 mm W x 610 mm D
Inset 838 mm W x 635 mm D
Minimum Base Support
Opening Width
Opening Height
Opening Depth**
Minimum Panel Size
Overlay 762 mm W x 264 mm H
Inset 746 mm W x 257 mm H
Minimum Panel Thickness
Maximum Panel Weight
*Allow 10 mm additional depth for cord thickness.
**For the inset application, add the thickness of
the drawer face to the opening depth.
746 mm
257 mm
597 mm
91 kg mm
749 mm
260 mm
610 mm
16 mm
11 kg