SOMFY Maestria WT Notice Originale page 46

EN
E1. MANUAL ADJUSTMENT OF END LIMITS
Setting the upper end limit
Press the "Up" and "Down" buttons simultaneously until
1)
the driven product moves up and down briefly.
Press the "Up" button until the driven product moves up and
down briefly.
Place the driven product in the d sired upper end
limit position
If necessary, adjust the position of the driven product
•
using the "Up" or "Down" button.
Briefly press the "Down" button and then press it again until
4)
the driven product moves up and down briefly.
Setting the lower end limit
Place the driven product in the desired lower end limit
5)
position.
If necessary, adjust the position of the driven product
•
using the "Up" or "Down" button.
Briefly press the "Up" button and then press it again until
6)
the driven product moves up and down briefly.
Press the "Up" and "Down" buttons simultaneously until
7)
the driven product moves up and down briefly to validate
end limit setting.
E2. MANUAL ADJUSTMENT OF THE LOWER END LIMIT AND AUTOMATIC ADJUSTMENT OF THE UPPER END LIMIT
Upper end limit is set automatically whereas down end limit must be set.
Setting the lower end limit
Press the "Up" and "Down" buttons simultaneously until
1)
the driven product moves up and down briefly.
Press the "Up" button until the driven product moves up and
2)
down briefly.
Place the driven product in the desired lower end limit
3)
position.
If necessary, adjust the position of the driven product
•
using the "Up" or "Down" button.
Briefly press the "Up" button and then press it again until
4)
the driven product moves up and down briefly.
Press the "Up" and "Down" buttons simultaneously until
5)
the driven product moves up and down briefly to validate
end limit setting.
Images not contractually binding
46
1) 2)
3s
3) 4)
0.5s
5) 6)
0.5s
7)
3s
1) 2)
3s
3)
4)
0.5s 3s
Copyright © 2016 Somfy SAS. All rights reserved.
3s
3s
3s
3s
5)
3s