Technical Specifications Of The Module - Siemens SIMATIC NET CP 343-2 Information De Produit

10

Technical Specifications of the Module

Feature
Bus cycle time
Configuration
Supported AS-i master profiles
Connection of the AS-i cable
Address area
Current consumption from SIMATIC
backplane bus
Power supply SIMATIC backplane bus
Current consumption from the AS-i cable
Power supply from the AS-i cable
Ambient conditions
D Operating temperature
D Transportation and storage temperature
D Relative humidity
Construction
D Module format
D Dimensions (W x H x D) in mm
D Weight
Product information CP 343–2 / CP 343–2 P
A5E00053856–04
Explanation/Values
5 ms with 31 slaves
10 ms for 62 slaves with the extended addressing mode
Using a button on the front panel or
FC "ASI_3422"
Without FC "ASI_3422": M0e
With FC "ASI_3422": M1e
Via S7-300 front connector with screw
contacts (20-pin)
Current load between contact 17 and 19 and
between 18 and 20 maximum 4 A
16 I bytes and 16 Q bytes in the analog area
of the S7-300
max. 200 mA
5 V DC
max. 100 mA
According to the AS-i specification
0..60_C
–40_C to +70_C
max. 95% at +25_C
S7-300U installation system; single width
40 x 125 x 115
approx. 200 g
English
e–7