Know Your Switch Plate - Advance ET700 500H Mode D'emploi

A - ENGLISH

KNOW YOUR SWITCH PLATE

A Solution Pump Switch - This switch turns the solution pump ON and OFF.
B Vacuum Switch - This switch turns the fi rst of the two vacuum motors ON and OFF.
C Vacuum Switch - This switch turns the second of the two vacuum motors ON and OFF.
D Circuit Indicator - When this light is on, it indicates that the two cords are on a separate circuit.
CAUTION!
The circuit breaker in the wall panel can trip if both cords are on the same circuit.
E Heat Switch - This three position switch controls the water temperature. Position (I) is low temperature, Position (O) is OFF and Position (II)
is high temperature.
A
A-8
INSTRUCTIONS FOR USE
B
ET700 500H - 56091169
D
C
E
4/2015