Wall Mounting - HumanTechnik scalla 1 Mode D'emploi

Wall mounting

1. Push the holder for the telephone recei-
ver out of its position and turn it by 180
degrees. Push the holder back into its
original position so that the hook is poin-
ting upwards (see Fig. 2). This prevents
the receiver from falling from the tele-
phone base when the telephone is mount-
ed on the wall.
Fig. 2:
Holder for the telephone receiver
Position for
tabletop use
2. Screw in two screws (not included) one
directly above the other 8 cm apart at the
place you would like to mount the tele-
phone on the wall.
26 English
Position for
wall mounting
3. Now set the telephone base on the screws
and slide it down slightly to secure it in
place (see Fig. 3).
Fig. 3:
Wall mounting for the telephone
1.
screw head
1.
2.
wall