Hotpoint Ariston AQUALTIS AQLF9D 69 U Instructions D'installation Et D'utilisation page 8

before you use the washing machine for
the first time, run a wash cycle with detergent and no
laundry, using the 90° cottons cycle without pre-wash.
1.
All the indicator lights will illuminate for 1 second and
the text AQUALTIS will appear on the display; the
indicator light corresponding to the
remain lit in a constant manner and the START/
PAUSE indicator light will flash.
2.
KNOB left or right, until the required programme has been
selected; the name of the programme will appear on the
display. A temperature and spin speed is set for each
programme; these may be adjusted. The cycle duration
will also appear on the display.
3.
Load the laundry, making sure you do not exceed the
maximum load value indicated in the
4.
need to add detergent when the "
mode is used, as the machine automatically intakes
detergent on the basis of the selected programme,
type of load and water hardness. Refer to the
paragraph " mode for implementing the
traditional operation mode.
5.
6.
relevant buttons on the control panel:
The machine automatically displays the maximum
temperature and spin speed values set for the
selected cycle, or the most recently-used settings if
they are compatible with the selected cycle. The
temperature can be decreased by pressing the
button, until the cold wash “OFF” setting is reached.
The spin speed may be progressively reduced by
pressing the button, until it is completely excluded
“OFF”. If these buttons are pressed again, the
maximum values are restored.

Exception: if the “
temperature can be increased up to a value of 90°C.
To set a delayed start for the selected cycle, press the
corresponding button repeatedly until the required delay
period has been reached. During the setting procedure,
the delay period and the text "
displayed, along with the flashing
delayed start has been set, the
fixed on the display, which will also indicate the duration
of the selected cycle with the text "
cycle duration. Press the DELAY TIMER button just
once to display the delay time set previously.
After the countdown has begun, the display will show
the text " :" and the delay period. Once the set
delay time has elapsed, the machine will begin its cycle
Press the button.
button will then
Turn the PROGRAMME
. Open the porthole door.
.
There is no
Use the
” programme is selected, the
:" will be
symbol. After the
symbol will remain
:" and the
and the display will show "
remaining until the end of the cycle. To remove the
delayed start option, press the button until the display
shows the text OFF; the
• Press the button to activate the option; the name
of the option will then appear on the display and
the corresponding indicator light will illuminate.
• Press the button again to deactivate the option;
the name of the option will then appear on the
display followed by the text OFF, and the
corresponding indicator light will switch off.
 If the selected option is not compatible with the
selected wash cycle, this incompatibility will be
signalled by the flashing of the indicator light and a
sound alert (3 beeps); the option will not be activated.
 If the selected option is not compatible with another
option that has been selected previously, the indicator
light corresponding to the first option selected will flash
and only the second option will be activated; the
indicator light corresponding to the button will remain
lit in a constant manner.
"
 The options may affect the recommended load value and/
or the duration of the cycle.
7.
PAUSE button. The corresponding indicator light
remains lit in a fixed manner and the porthole door
locks (the DOOR LOCKED indicator light
illuminates). The icons corresponding to the wash
cycle phases will light up during the cycle to indicate
which phase is currently in progress. To change a
wash cycle once it has already started, pause the
washing machine by pressing the START/PAUSE
button; then select the desired cycle and press the
START/PAUSE button again. To open the door during
a wash cycle, press the START/PAUSE button; if the
DOOR LOCKED
may open the door. Press the START/PAUSE button
again to restart the wash cycle from the point at
which it was interrupted.
8.
by the illuminated text
opened immediately. If the START/PAUSE indicator light
is flashing, press the button to end the cycle. Open the
door, unload the laundry and switch off the machine.
 If you wish to cancel a cycle which has already begun,
press and hold the
the machine switches off.
The Aqualtis washing machine makes it easier for you to
wash even the most valuable and delicate garments in
complete confidence thanks to the special bag which
protects the laundry (this is supplied with the machine).
We recommend that the bag is used every time you
wash quilts and padded items with an outer layer made
using synthetic material.
:" and the time
symbol will disappear.
Press the START/
indicator light is switched off you
This is indicated
. The porthole door may be
button until the cycle stops and