Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Auxiliary function selection
Select the desired auxiliary functions before
starting the programme. Furthermore, you may
also select or cancel auxiliary functions that are
suitable to the running programme by pressing the
Start / Pause / Cancel button when the machine is
operating. For this, the machine must be in a step
before the auxiliary function you are going to select
or cancel.
Depending on the programme, press 2a, 2b, 2c or
2d buttons to select the desired auxiliary function.
Symbol of the selected auxiliary function appears
on the display.
Some functions cannot be selected together.
C
If a second auxiliary function conflicting with
the first one is selected before starting the
machine, the function selected first will be
canceled and the second auxiliary function
selection will remain active. For example,
if you want to select Quick Wash after you
have selected the Prewash, Prewash will be
canceled and Quick Wash will remain active.
An auxiliary function that is not compatible
C
with the programme cannot be selected. (See
"Programme and consumption table")
Auxiliary Function buttons may vary according
C
to the model of the machine.
• Prewash
A Prewash is only worthwhile for heavily soiled
laundry. Not using the Prewash will save energy,
water, detergent and time.
F1 appears on the display when you select this
function (a).
• Quick Wash
This function can be used in Cottons and
Synthetics programmes. It decreases the washing
times and also the number of rinsing steps for
lightly soiled laundry.
F2 appears on the display when you select this
function.
When you select this function, load your
C
machine with half of the maximum laundry
specified in the programme table.
• Rinse Plus
This function enables the machine to make
another rinsing in addition to the one already made
after the main wash. Thus, the risk for sensitive
skins (babies, allergic skins, etc.) to be effected by
the minimal detergent remnants on the laundry can
be reduced.
F3 appears on the display when you select this
function .
• Anti-Creasing
This function creases the clothes lesser when they
are being washed. Drum movement is reduced
and spinning speed is limited to prevent creasing.
In addition, washing is done with a higher water
level.
F4 appears on the display when you select this
function.
• Rinse Hold
If you are not going to unload your clothes
immediately after the programme completes, you
may use rinse hold function to keep your laundry
in the final rinsing water in order to prevent them
from getting wrinkled when there is no water in the
machine. Press Start / Pause / Cancel button after
this process if you want to drain the water without
spinning your laundry. Programme will resume and
complete after draining the water.
If you want to spin the laundry held in water, adjust
the Spin Speed and press Start / Pause / Cancel
button.
The programme resumes. Water is drained,
laundry is spun and the programme is completed.
• Soaking
The Soaking auxiliary function ensures better
removal of stains ingrained into the clothes by
holding them in the detergent water prior to startup
of the programme.
Time display
Remaining time to complete the programme
appears on the display while the programme is
running. Tim is displayed as "
minutes format.
Programme time may differ from the values
C
in the "Programme and consumption
table" depending on the water pressure,
water hardness and temperature, ambient
temperature, amount and the type of laundry,
auxiliary functions selected and the changes
at the mains voltage.
Delayed start
With the Delayed Start function the startup of
the programme may be delayed up to 24 hours.
Delayed start time can be increased by increments
of 30 minutes.
Do not use liquid detergents when you set
C
Delayed Start! There is the risk of staining of
the clothes.
Open the loading door, place the laundry and put
detergent, etc. Select the washing programme,
temperature, spin speed and, if required, the
auxiliary functions. Set the desired delayed start
time by pressing the Delayed Start + or - buttons.
Delayed Start symbol flashes. Press Start / Pause
/ Cancel button. Delayed start countdown starts.
Delayed Start symbol illuminates steadily. Start
symbol appears. ":" sign in the middle of the
delayed start time on the display starts flashing.
Additional laundry may be loaded during
C
the delayed start period. At the end of the
countdown, Delayed Start symbol disappears,
washing cycle starts and the time of the
selected programme appears on the display.
Changing the delayed start period
If you want to change the time during countdown:
Press Start / Pause / Cancel button. ":" sign in
the middle of the delayed start time on the display
13
EN
01:30
" in hours and
Publicité
Table des Matières
