Ice-Cream Maker - SEVERIN EZ-7401 Mode D'emploi

Ice-cream maker

Dear Customer,
Before using the appliance, the user should
read the following instructions carefully.
Connection to the mains supply
Make sure that the supply voltage
corresponds with the voltage marked on the
rating label of the appliance. This product
complies with all binding CE labelling
directives.
Familiarisation
1. Crank
2. Grater lid
3. Grater insert
4. Grater housing
5. Power cord with plug
6. Grater top
7. Stirring insert
8. Power-cord storage (on underside of
appliance)
9. Rating label (on underside of
appliance)
10. Rotary switch
11. Base unit
12. Interior lid
13. Double-walled ice-cream bowl
14. Main cover
Important safety instructions
●
Before the appliance is used, the main
body as well as any attachments fitted
should be checked thoroughly for any
defects. If the appliance, for instance, has
been dropped onto a hard surface, it
must no longer be used: even invisible
damage may have adverse effects on its
operational safety.
●
This appliance is not intended for use by
any persons (including children) with
reduced physical, sensory or mental
capabilities, or lacking experience and
knowledge, unless they have been given
supervision or instruction concerning the
use of the appliance by a person
responsible for their safety.
●
Children should be supervised to ensure
that they do not play with the appliance.
●
Caution: keep any packaging materials
well away from children: there is a risk of
suffocation.
●
During operation, the appliance must be
placed on a level, non-slip surface,
impervious to splashes and stains.
●
Do not leave the appliance unattended
while in use.
●
Always ensure that the action of the
motor cannot be impeded or blocked by
over-solid ice-cream or any hard objects.
●
To prevent the ice-cream bowl from
being damaged, do not use any sharp or
pointed metal objects to remove the ice-
cream.
●
Do not allow the appliance or its power
cord to touch hot surfaces or to come
into contact with any heat sources.
●
Never store plastic components in a
freezer.
●
Always remove the plug from the wall
socket
- in case of any malfunction,
- after use, and
- during cleaning.
●
When removing the plug from the wall
socket, never pull on the power cord;
always grip the plug itself.
●
Do not let the power cord hang free.
●
No responsibility will be accepted if
damage results from improper use, or if
these instructions are not complied with.
●
This appliance is intended for domestic
use only and not for commercial
applications.
●
In order to comply with safety
regulations and to avoid hazards, repairs
of electrical appliances must be carried
out by qualified personnel, including the
replacement of the power cord. If repairs
are needed, please send the appliance to
one of our customer service departments.
The address can be found in the
appendix to this manual.
9