2. Press the red button to disengage
the buckle.
15
3. Place the child in the child
restraint and engage the buckle.
16
16
4. Pull down the adjustment webbing
and adjust it to the proper length
so that your child is snugly
secured.
17
!
After the child is seated, recheck
whether the shoulder harnesses
are at proper height.
!
Make sure that the shoulder
harnesses fit snugly against the
shoulders of the child (no belt
slack).
11
15
17
Booster Mode
( for Child 15–36kg / approx. 3–12 years old)
see images
-
18
23
i. Installation
!
Just use the vehicle seat belt when installing the child restraint in the booster
mode, do no longer the internal harness system. Please store the shoulder
straps, buckle and buckle tongues in respective storage compartments as
shown in
.
20
!
Please adjust the shoulder harnesses to proper length before store the
shoulder straps and buckle in their storage compartments.
!
Please adjust the child restraint to proper angle. Angle indication: With top
triangle and red triangle aligned.
!
When installing and adjusting the safety belts, make sure that both the
shoulder belt and the waist belt are not twisted and will not keep the safety
belts from being properly positioned.
1. Press the red button to disengage the buckle.
2. Remove the crotch strap.
19
18
18
19
12