Leica DIGICAT 100 Manuel De L'utilisateur page 25

Depth measurement,
only with DIGICAT 200
How to Use the DIGICAT
With the DIGICAT over a DIGIMOUSE or DIGITRACE and in line with the direction of
the service press and hold the depth button.

Depth measurement is available only in 33 kHz mode.

The depth to the centre of the service will be displayed - in metric or ft / inch
units depending on the model.
DIGICAT 100/200
1. Hold the DIGICAT over a line
and at 90 degrees to the
direction of the service (see
chapter "Direction").
2. Select 33 kHz mode
3. Press and release the depth
button for line depth.
4. The display LEDs will indicate
the depth. The depth indica-
tion is displayed for five
seconds.
23