Setting The Torque - Hilti SF 2-A12 Notice D'utilisation Originale

3. Insert the accessory tool in the chuck and then turn the keyless chuck
firmly until tight.
4. Check that the accessory tool is held securely.
6.2 Selecting the gear
The gear selector switch can be operated only when the motor is not
running.
▶ Select the gear.

6.3 Setting the torque

▶ Set the desired torque.
▶ The torque is limited only when the power tool is set to screwdriving
mode .
6.4 Setting forward or reverse rotation
An interlock prevents switching while the motor is running.
The control switch is locked when the forward/reverse switch is in the
middle position (switch-on interlock).
▶ Set the forward/reverse switch to the desired direction of rotation.
▶ An interlock prevents switching while the motor is running. In the
middle position the switch is locked (switch-on interlock).
6.5 Selecting the function
SF 2H­A12
▶ Select the desired function.
6.6 Screwdriving
1. Set the function selector ring to the "screwdriving" position .
2. Set the torque setting ring to the desired torque.
3. Set the forward/reverse switch to the desired direction of rotation.
6.7 Drilling
1. Set the function setting ring/torque setting ring to the "drilling" position
.
2. Set the forward/reverse switch to the "forward" position.
12 English
3
5
4
2235450
*2235450*