Charging The Battery - Hilti SF 2-A12 Notice D'utilisation Originale

Keyless chuck clamping range
Ø drill bit (softwood)
Ø drill bit (hardwood)
Ø drill bit (metal)
Ambient temperature for opera-
tion
Storage temperature
4.2 Battery
Battery operating voltage
Ambient temperature for operation
Storage temperature
Battery charging starting temperature
5 Preparations at the workplace
WARNING
Risk of injury by inadvertent starting!
▶ Before inserting the battery, make sure that the product is switched off.
▶ Remove the battery before making any adjustments to the power tool or
before changing accessories.
Observe the safety instructions and warnings in this documentation and on
the product.

5.1 Charging the battery

1. Before charging the battery, read the operating instructions for the
charger.
2. Make sure that the contacts on the battery and the contacts on the
charger are clean and dry.
3. Use an approved charger to charge the battery.
10 English
SF 2-A12
0.8 mm ...
10 mm
(0.03 in ... 0.4 in)
0.046875 in ...
0.546875 in
0.046875 in ...
0.390625 in
0.046875 in ...
0.234375 in
−17 ℃ ... 60 ℃
(1 ℉ ... 140 ℉)
−20 ℃ ... 70 ℃
(−4 ℉ ... 158 ℉)
2235450
*2235450*
SF 2H-A12
0.8 mm ...
10 mm
(0.03 in ... 0.4 in)
0.046875 in ...
0.546875 in
0.046875 in ...
0.390625 in
0.046875 in ...
0.234375 in
−17 ℃ ... 60 ℃
(1 ℉ ... 140 ℉)
−20 ℃ ... 70 ℃
(−4 ℉ ... 158 ℉)
10.8 V
−17 ℃ ... 60 ℃
(1 ℉ ... 140 ℉)
−20 ℃ ... 40 ℃
(−4 ℉ ... 104 ℉)
−10 ℃ ... 45 ℃
(14 ℉ ... 113 ℉)