Safety Barrier Removal; Firebox Glass Door Removal - Napoleon Ascent X Serie Manuel Du Propriétaire

maintenance
EN
5.3

safety barrier removal

WARNING
!
• Glass may be hot. Do not touch glass until cooled.
• If equipped with door latches that are part of a safety system, they must be properly engaged. Do not
operate the appliance with latches disengaged.
• Facing and/or fi nishing materials must not interfere with air fl ow through air openings, louvre openings,
operation of louvres, or doors/access for service. Observe all clearances when applying combustible
materials.
• Before door is removed, turn the appliance off and wait until appliance is cool to the touch. Doors are heavy
and fragile so handle with care.
A barrier designed to reduce the risk of burns from the hot viewing glass is provided with the
appliance and must be installed.
Before the glass door can be removed, the safety screen must be removed. Lift the safety screen off the four
pins, tilt the top forward and remove from the appliance.
5.4

firebox glass door removal

Leave a hand on the glass door during entire door removal. The glass door is secured to the firebox with four
spring latches. Pull the handles of the latches forward, then lift the latches out from the door frame to release the
door. Next, lift the door up until the bottom edge clears the bottom shoulder screws of the appliance. Carefully
grip the top and bottom of the door lifting it off the appliance.
note:
These spring latches make up the spring relief system for
the appliance. Ensure the door opens freely and closes
sealed.
note:
When mounting the door, ensure there is equal space
on both the left and the right side. This allows for easy
installation of the front.
Reverse these steps to reinstall the door. Ensure safety screen
is installed correctly.
18
W415-1853 / B / 10.18.18
47.1