How To Install The Product; Main Installation Tasks - Axis Q8685-EPTZ Mode D'emploi

AXIS Q8685-E PTZ Network Camera

How to install the product

Main installation tasks

1. Mount the base unit on page 21
2. Route the cables on page 22
3. Install the network link on page 28
4. Connect the cables on page 29
5. How to access the product on page 30
Optional installation steps:
• Install an SD card (optional) on page 31
• Inverted installation (optional)
- Inverted installation on page 31
- Set the inverted configuration on page 34
• Illuminator kit installation (optional)
Follow one of two installations:
- Install the illuminator kit (default installation) on page 35
- Install the illuminator kit (inverted installation) on page 40
• Enable the illuminator kit on page 45
DANGER
Risk of electric shock. All cables shall be de-energized before installing the product.
CAUTION
The electrical connections and conduit installations shall be made by a certified electrician
and in compliance with local regulations.
CAUTION
Risk of injury. Moving parts. Keep your body parts away from the product when in
operation. Disconnect from power supply before installing or performing maintenance
on the product.
CAUTION
Risk of injury. Hot surface. Do not touch the product when in operation. Disconnect
from power supply and allow the surfaces to cool before performing maintenance on
the product.
20