Install The Hardware - Axis M1054 Guide D'installation

Install the Hardware

CAUTION
This Axis product is intended for indoor use.
This product is shipped with a base plate and a short extension tube
mounted. Unscrew the extension tube to release the base plate from the
cover plate. Depending on whether the camera is to be mounted on a wall
or shelf, follow the appropriate instructions below.
• To install the product using the wall mount, see page 15.
• To install the product using the shelf mount, see page 17.
Mount the Camera on a Wall
1. Using the supplied screws, fix the base plate to a flat
(horizontal or vertical) surface.
2. Place the cover plate over the base plate. If needed, attach the
short extension tube and/or one or more of the long extension
tubes provided.
1
2
3
4
5
AXIS M1054 Network Camera
Short extension tube
Tube joint
Cable clip
Long extension tube
Base cover
15