Setting The Atsc Parental Lock - Dynex DX-R20TR Guide De L'utilisateur

46
3 Press the CH+ or CH– button to select the movie rating you want to block or unblock,
then press the VOL+ or VOL– button to block or unblock the rating. A check mark
indicates that a rating is blocked. When you block a rating, that rating and all higher
ratings are blocked.
• NR–Not rated
• G–General audiences
• PG–Parental guidance suggested
• PG-13–Parental guidance strongly suggested for children under 13
• R–Parental guidance recommended for 17 and under
• NC-17–Not recommended for 17 and under
• X–Adults only
4 Press the MENU button one or more times to close the OSD.

Setting the ATSC parental lock

Note: The ATSC PARENTAL LOCK option only appears if the TV signal carries V-CHIP
information.
To set the ATSC parental lock:
1 Press the MENU button. The TV on-screen display (OSD) opens.
2 Press the CH+ or CH– button to select DTV SETUP, then press the VOL– button. The
DTV SETUP menu opens.
ARENTAL LOCK
3 Press the CH+ or CH– button to select ATSC PARENTAL LOCK. The ENTER CODE screen
opens.
Using the TV