Selecting The Color System For Atv; Displaying Channel And Program Information - Dynex DX-R20TR Guide De L'utilisateur

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

24

Selecting the color system for ATV

To select the color system for ATV:
1 Press the MENU button. The TV on-screen display (OSD) opens.
2 Press the VOL+ or VOL– button to select CHANNEL, then press the CH– button. The
CHANNEL menu opens.
3 Press the CH+ or CH– button to select COLOR SYSTEM, then press the VOL+ or VOL–
button to select AUTO or NTSC.
Note: The COLOR SYSTEM option only appears if the TV signal is analog.

Displaying channel and program information

To display channel and program information for analog TV:
1 Press the round DISPLAY button. The currently selected channel and audio mode
appear in the upper right corner of the screen.
2 Press the round DISPLAY button again to turn off the display.
To display channel and program information for digital TV:
1 Press the round DISPLAY button. The currently selected channel and the signal mode
appear in the upper right corner of the screen.
2 Press the round DISPLAY button again. Information about the currently selected
channel and program appears.
Using the TV

Publicité

Table des Matières
loading

Table des Matières