Setting Up Your Tv Combo; Connecting An Antenna - Dynex DX-R20TR Guide De L'utilisateur

Setting up your TV combo

Setting up your TV combo

Connecting an antenna

Use the following illustration to connect an antenna.
Power cord
Note: We recommend an 75 ohm cable to avoid interference. Do not bind the antenna cable
to any other cables.
To connect a VHF/UHF combination antenna with a single 75 ohm cable or twin-lead
300 ohm wires:
• Connect the 75 ohm cable from the VHF/UHF antenna to the RF IN jack on the back of
your TV combo. If your antenna has a 300 ohm twin-lead wire, use a 300-75 ohm
transformer (not included).
75 ohm coaxial
cable
VHF
75 ohm coaxial cable
RF IN jack
300-75 ohm
matching
transformer
15
UHF
RF IN jack