Electric Hedge Trimmer - IKRA IHS 550 Manuel D'utilisation

Electric Hedge Trimmer

Technical data
Operating Voltage
Nominal Frequency
Nominal Consumption
No-load Speed n
0
Cutting length
Cutting capacity
Weight (without flex)
Noise Pressure Level L
Vibration
(according to EN 60745-1)
Class of protection: II / DIN EN 60745/VDE 0740
Emissions
- The specified vibration emission value was measured by a standardized test methods and can compare with other
power tools are used.
- The specified vibration emission value can also be necessary for the assessment of work breaks are used.
- The specified vibration emission value can vary during the actual use of the electric tool by specifying the value,
depending on the way how to use the power tool.
- Note: You create the privilege against vascular pulsations of the hands in time breaks.
The noise pressure level at the place of work can exceed 80 dB(A). In such cases the operator will require noise
protection (e.g. wearing of ear protectors).
Attention: Noise protection! Please observe the local regulations when operating your device.
Interference suppressed in accordance with EN 55014, EN 61000-3-2, EN 61000-3-3.
We reserve the right to make changes to the technical specifications.
The devices are manufactured in accordance with the provisions of EN 60745-1and EN 60745-2-15 and fully comply with
the provisions of the German Product Safety Act.
GB | Operating Instructions
pA (according to EN 60745-1+EN 60745-2-15)
IHS 550
V~ 230-240
Hz 50
W 550
-1
min 1700
mm 450
mm 16
kg 3,1
dB (A) 92,5
2
m/s 4,085 K 1,5 m/s
GB-2
K 3,0 dB (A)
2