Specifications - KINTERA KCO-1-N Manuel D'installation Et Mode D'emploi

SPECIFICATIONS

Model Racks BTU.hr
KCO-1-N 5
KCO-1-P 5
Recommended incoming gas pressure: Natural 6" W/C, LP 12" W/C. The internal pressure regulator is factory
set for proper operating pressure of 4.0" W/C for Natural and 10.0" W/C for LP. The operation pressure
should be checked and verified upon installation.
*Rear Wall Clearance from back of motor: TWO INCHES (2") MINIMUM,
Side Clearance; 6" Side both sides from Combustible Walls.
***Casters not available for single deck models.
UNPACKING
Owner's/Installer Manual Rev 20180822
(Continued)
Voltage
54,000 120 VAC
54,000 120 VAC
Amps External Dims
41"W x 39"D x 60"H
5.9
41"W x 39"D x 60"H
5.9
4
For Warranty Service Call 866-909-2855
Internal Dims
28.5"W x 21.5"W x 20"H
28.5"W x 21.5"W x 20"H