RIB SUPER 8000 FAST Mode D'emploi page 31

A - CONNEXIONS
J1 L1 - N 230Vac 50/60Hz POWER SUPPLY (120Vac/60Hz UPON REQUEST)
BLINKER (40 W MAX.)
J2 U MOTOR COMMON CONNECTION
V-W MOTOR PHASES CONNECTIONS
J3 PED. BUTT. PEDESTRIAN OPENING CONTACT (NO)
A+ TEST +24Vdc SAFETY STRIP SELF-TEST POWER SUPPLY
LSC CLOSE LIMIT SWITCH THAT CUTS OFF THE MOTOR IN CLOSING
COM LIMIT SWITCH COMMON CONTACT
LSO OPEN LIMIT SWITCH THAT CUTS OFF THE MOTOR IN OPENING
J4 STOP STOP CONTACT (NC)
OPEN OPENING CONTACT (NC)
CLOSE CLOSING CONTACT (NC)
K. BUTT. SINGLE PULSE CONTACT (NO)
A+ ACCESSORIES POWER SUPPLY +24Vdc
A- ACCESSORIES POWER SUPPLY -24Vdc
SIGNAL GATE OPEN INDICATOR 24Vdc
COM COMMON CONTACT (common line for all the command and safety
inputs)
EDGE NC SAFETY STRIP CONTACT (NC)
J5 AERIAL RADIO ANTENNA
COM COMMON CONTACT (common line for all the command and safety
inputs)
PHOTO NC PHOTOCELLS CONTACT (NC)
J6 PROBE -
J7 ENCODER -
J8 RADIO CONNECTOR FOR EXTERNAL RADIO RECEIVER 24Vdc
S3 PROG. PROGRAMMING BUTTON
TR1 LOW SPEED -
TR2 TORQUE -
DO NOT REMOVE ANY JUMPER! OTHERWISE THE OPERATOR WILL
SW
RADIO NOT WORK!
SW S1 DO NOT REMOVE THE JUMPER! OTHERWISE THE OPERATOR WILL
NOT WORK!
SW1 DIP-SWITCHES
SW2
SW3
L1 L2 L3
N
3-PHASE LINE
Install a
Residual Current Circuit
Breaker like
ABB F204A-25/0,3
J5
TR1
TR2
J4
SW
S1
J3
J2
J1
S1-CRX
AC07097
31
S3 J7 J6
NC: NORMALLY CLOSED CONTACT
NO: NORMALLY OPEN CONTACT
G
B
SW
RADIO
RADIO
J8
SW1
SW2
SW3