Managing Incoming Calls - Jensen VM9214 Mode D'emploi

Masquer les pouces Voir aussi pour VM9214:

Les langues disponibles

VM9214

Pairing the Bluetooth System with Your Mobile

Phone and Head Unit

1. Press the

button (7) to initiate the pairing process. Keep the mobile

phone within 2 meters of the head unit when pairing. (To terminate the

pairing process, press the

2. Select the Bluetooth setup option on the mobile phone to be paired

(please refer to the phone's instruction manual to learn how to enter

Bluetooth setup, turn Bluetooth on/off, and perform pairing).

NOTE: Some phones require a "pass key" or pairing code to connect. If

your phone requires a pass key or pairing code, you will need to enter

this number in the Pairing Code field under the Bluetooth SETUP menu.

The default pairing code for many phones is "0000". The default code for

the VM9214 is "1234". See "Bluetooth Sub-menu Features" on page 22

for instructions on entering the pairing code.

3. Select "VM9214" from the pairing list on the mobile phone.

•

If pairing is successful, the TFT will display the paired mobile phone

model number or name (as specified in your phone's Bluetooth Setup

menu).

•

If pairing fails, "Phone Pairing Fail" is displayed at the bottom of the

screen.

Reconnecting

Once the Bluetooth device has been paired, you can touch the connect

button (9) to reconnect.

NOTE: You can only connect to a phone using the buttons on the on-

screen Phone interface.

Each time the

button is pressed, the head unit will automatically reconnect

with the mobile phone once (only if the mobile phone was previously paired

with the head unit).