Parking Brake Inhibit; Monitor Movement Mechanism - Jensen VM9214 Mode D'emploi

VM9214

Parking Brake Inhibit

When the pink "Parking" wire is connected to the vehicle Parking Brake circuit,
the front TFT monitor will display video when the Parking Brake is engaged.
(When the pink wire is grounded via the Parking Brake circuit, video will be
displayed.)

Monitor Movement Mechanism

If an obstruction occurs in the monitor path, the following protective
measurements can be executed to prevent damage to the mechanism or
monitor:
Obstruction
Monitor loading
out horizontally
Monitor loading in
horizontally
Monitor loading
out vertically
Monitor loading in
vertically
After the protective procedure is executed, normal operation is resumed by
pressing the OPEN button (1) or disconnecting and reconnecting the power.
Table 3: Monitor Protective Measures
Self Protection
Monitor is automati-
cally loaded into unit
Unit stops at
obstruction point
Unit stops at
obstruction point
Unit stops at
obstruction point
OPEN Button
Pressed
Monitor fully
extended horizon-
tally
Monitor fully
extended horizon-
tally
Monitor swivels
back to the unit
Monitor swivels
back to the unit
13
Power
Reconnected
Monitor is automati-
cally loaded into unit
Monitor is automati-
cally loaded into unit
Monitor swivels
back to the unit
Monitor swivels
back to the unit