Display And Function Buttons; Dmx-Controlled Operation; Addressing - Futurelight DJ-HEAD 250 WASH Pro-Head-Wash Mode D'emploi

Display and function buttons

•
Press the Mode Button and select from the functions F1 – F5.
F1 – Linear Color
With this function you can adjust Step Color or Linear Color.
•
Press the Mode button and select „F1".
•
Press the Up button to select "y" if you wish to enable this function or press the Down button to select
"n" if you don't.
•
Press Enter to confirm.
F2 - Pan Reverse
With this function you can reverse the Pan-movement.
•
Press the Mode button and select „F2".
•
Press the Up button to select "y" if you wish to enable this function or press the Down button to select
"n" if you don't.
•
Press Enter to confirm.
F3 - Tilt Reverse
With this function you can reverse the Tilt-movement.
•
Press the Mode button and select „F3".
•
Press the Up button to select "y" if you wish to enable this function or press the Down button to select
"n" if you don't.
•
Press Enter to confirm.
F4 - Demo operation
In the Stand Alone mode, the DJ-HEAD 250 WASH can be used without controller. Disconnect DJ-HEAD
250 WASHfrom the controller and call up the internal program (F4).
•
Press the Mode button and select „F4".
•
Press the Up button to select "y" if you wish to enable this function or press the Down button to select
"n" if you don't.
•
Press Enter to confirm.
F5 – Reset
With this function you can reset the device via the Control Board.
•
Press the Mode button and select „F5".
•
Press the Up button to select "y" if you wish to enable this function or press the Down button to select
"n" if you don't.
•
Press Enter to confirm.

DMX-controlled operation

You can control the projectors individually via your DMX-controller. Every DMX-channel has a different
occupation with different features. The individual channels and their features are listed under DMX-protocol.

Addressing

The Control Board allows you to assign the DMX starting address, which is defined as the first channel from
which the DJ-HEAD 250 WASH will respond to the controller.
If you set, for example, the address to channel 14, the DJ-HEAD 250 WASH will use the channel 14 to 26 for
control.
Please, be sure that you don't have any overlapping channels in order to control each DJ-HEAD 250 WASH
correctly and independently from any other fixture on the DMX-chain.
If several DJ-HEAD 250 WASH are addressed similarly, they will work synchronically.
Press the Up/Down-buttons for setting the desired starting address.
29/64 00026432.DOC, Version 1.2