Receiving Fm Stations; Receive Fm Stations - Imperial DABMAN i550 CD Mode D'emploi

8. GENERAL OPERATION

8.5 Receiving FM stations

Scan settings
If you press the Back button of your radio (optionally of the remote control) while the FM radio is playing,
you can specify in the submenu 'Scan setting' whether the device should only consider stations with good
transmission quality for the scan.
Audio settings
If FM reception is generally poor, you can specify in the 'Audio setting' sub-item that the stations are only to
be played back in mono and no longer in stereo. This can significantly reduce the noise in the signal.
Scan
Press the MODE button and switch to the FM Radio field.
Confirm with OK.
The device switches to the last reception frequency set.
To start a frequency scan to the next available station, briefly
press and hold the up arrow key.
The radio searches for the next receivable station.
As soon as a station has been found, the search will stop.
Manual station search
As an alternative to a scan, you can use the Skip Back/Skip
Forward buttons either directly on the radio or on the remote
control to select specific frequencies
and thus find the stations located there.
93
EN