10. BLUETOOTH
10.1 Establish a Bluetooth connection
10.2 Playing media via Bluetooth
If you have established a Bluetooth connection as described in Chapter 10.1, you can play music files stored
on an external device via the
DABMAN i550 CD. To do this, proceed as follows:
Start playback of the music on the external device by switching to the corresponding playback function (MP3
player, etc.) or select a track from the respective playlist and start playback.
You can play the sound of an external device on the DABMAN i 300 CD.
The device has one analog audio input, two digital-electrical inputs and two digital-optical inputs.
>
Connect the external device to the audio input on the rear panel of the radio.
>
Press the MODE button repeatedly until [AUX IN] appears on the display.
Alternatively:
>
Press and hold the MENU button, then select AUX IN from the main menu.
To optimally set the volume, use both the volume adjuster on the radio as well as the connected
device.
Please note that a very low volume setting of the connected device and a correspondingly higher volume
setting of the radio will also amplify annoying noise/interference to a greater extent and thus be heard more
clearly. We thus recommend adjusting the volume of the DABMAN i550 CD e.g. on a DAB+ or FM station,
switching to the audio input and then adjusting the volume of the connected device so that the total volume
of the audio input roughly corresponds to the volume of the DAB+/ FM station. This way you can also avoid
major volume differences when switching between the DABMAN i550 CD functions.
If you have selected Bluetooth mode on the radio,
it is in pairing mode and will search for Bluetooth devices to
connect to.
Now activate the Bluetooth function of the external device to
be connected (for further details, please refer to the operating
manual of that device). Search for "DABMAN i550 CD" in the list
of available devices, select it and establish the connection.
In the radio display, a Bluetooth symbol appears in the lower left
corner.
105
EN