Selecting Saved Stations; Adjust Station Order - Imperial DABMAN i550 CD Mode D'emploi

8. GENERAL OPERATION

8.4.1. Selecting saved stations

> Briefly press the PRESET button on the device.
> Use the SCROLL&SELECT dial to select a memory location 1...30 and press the
SCROLL&SELECT dial to play the station stored on it.
Alternatively:
> Press the desired number button 1 ... 12 on the remote control.
If you have not stored a station on the selected programme slot,
[save slot empty] appears in the display.
> Press the INFO button repeatedly until the signal strength is displayed:
This way, you can optimally align the telescopic antenna towards stations that are difficult to
receive at your radio's location. This means that stations that have not yet been found in a scan can still be
found and played.
> To do so, select MENU > Set Manually and then select a station frequency. The signal strength of this
frequency will be displayed.
> Pressing the INFO button several times switches through different
information such as programme type, multiplex name, frequency, signal error rate, data bit rate
programme format, date, DLS.

8.4.2. Adjust station order

> Press and hold the MENU key, and then select "Station order".
> Select a sorting type and confirm your selection with OK.
92
EN
The level of the bar indicates the current level.
Stations whose signal strength is below the required minimum
signal strength do not send a sufficient signal.
If necessary, adjust the antenna again.
Under the menu item Manual Setting, you can select the
reception stations individually and display their signal strength.