Briteq BT-W12L10 ZOOM Mode D'emploi page 6

ENGLISH
DMX Channel Mode
Used to select the desired channel mode.
 Select "DMX Channel Mode" and press
ENTER
 Use DOWN / UP buttons to select the
desired DMX channel mode.
 Press the ENTER button to save.
To return without any change or go to a
previous menu, press the MENU button.
View DMX Value
 Select "View DMX Value" and press ENTER.
 The display now shows the DMX-values for
the different channels.
To return to a previous menu, press the MENU
button or after 60 seconds the display will
automatically return to normal mode.
Fixture Settings
This submenu contains specific fixture
settings.
 Press the MENU button and select the
"Fixture Settings" submenu.
Pan Inverse
No: Panning movement is not inverted.
Yes: Panning movement is inverted.
 Select "Pan Inverse" and press ENTER
 Use DOWN / UP buttons to select Yes or No.
 Press the ENTER button to save.
To return without any change or go to a
previous menu, press the MENU button.
Tilt Inverse
No: Tilt movement is not inverted.
Yes: Tilt movement is inverted.
 Select "Tilt Inverse" and press ENTER
 Use DOWN / UP buttons to select Yes or No.
 Press the ENTER button to save.
To return without any change or go to a
previous menu, press the MENU button.
P/T Feedback
While touching the head of the projector, the
pan/tilt positioning can be disturbed and not in
sync with the other machines. P/T Feedback
can automatically correct such issues.
No: Pan/Tilt are not automatically corrected.
Yes: Pan/Tilt are automatically corrected.
 Select "P/T Feedback" and press ENTER
 Use DOWN / UP buttons to select Yes or No.
 Press the ENTER button to save.
To return without any change or go to a
previous menu, press the MENU button.
Bl.O. P/T Moving
"Blackout while Pan/tilt are moving": while
pan/tilt positions are changing the projector can
cut off the output to obtain a special effect.
BRITEQ
®
4/73
OPERATION MANUAL
BT-W12L10 ZOOM