Environmental Notice - Braun Silk-epil 7 Série Mode D'emploi

Please be aware that especially at the beginning,
these areas are particularly sensitive to pain.
Therefore, we recommend that you select speed
setting «I» for the first few epilation processes.
With repeated usage the pain sensation will
diminish. For more comfort, ensure that the hair is
at the optimum length of 2–5 mm.
Before epilating, thoroughly clean the respective
area to remove residues (like deodorant). When
epilating the underarm, keep your arm raised
up so that the skin is stretched and guide the
appliance in different directions. As skin may be
more sensitive directly after epilation, avoid using
irritating substances such as deodorants with
alcohol.
5 Facial epilation
For removing any unwanted hair from the face
or other sensitive areas, use the precision cap (9)
as an optional attachment to be placed on the
epilation head (2).
For the first few usages, we recommend that you
select speed setting «I» in order to get used to the
epilation sensation in those sensitive areas.
Prior to epilation, we recommend cleaning the
skin with alcohol to promote good hygiene.
When epilating the face, stretch the skin with one
hand and slowly guide the epilator with your other
hand the direction of the switch.
Overheating protection
As a safety feature to avoid the unlikely event of the
appliance overheating, it may happen that the red
low charge light shines permanently for 8 seconds
and then the appliance turns off automatically. In this
case, turn the switch back to the position «0» and let
the appliance cool down.
6 Cleaning the epilation head
Regular cleaning ensures better performance.
a Brush cleaning:
Remove the cap and brush it out.
Thoroughly clean the tweezers from the rear side
of the epilator head with the brush dipped into
alcohol. While doing so, turn the tweezer element
manually. This cleaning method ensures best
hygienic conditions for the epilation head.
b Cleaning under running water:
After each wet usage, clean the appliance under
running water.
Remove the cap. Hold the appliance with the
epilation head under hot running water. Then press
the release button (6) to remove the epilation head.
Thoroughly shake both, the epilation head and the
appliance to make sure that remaining water can
drip out. Leave both parts to dry. Before reattaching,
make sure that they are completely dry.
8
B Using the shaver head attachment
The shaver head (10) is designed for a fast and close
shave of underarms and bikini line, contour trimming
and cutting hair to 5 mm length. Use the shaver
head on dry skin only.
a Shaving: select « ».
b Contour trimming: select « ».
c Cutting hair to 5 mm length: select « » and put
on the trimmer cap (I).
d Cleaning
Do not clean the shaver foil (II) with the brush as
this may damage the foil.
e The shaving parts need to be lubricated regularly
every 3 months.
f Replace the foil frame (II) and cutter block (III)
when you notice a reduced shaving perform-
ance. Replacements parts can be obtained from
your retailer or Braun Customer Service Centres
or via www.service.braun.com. Do not shave
with a damaged foil.

Environmental notice

This product contains rechargeable batteries.
In the interest of protecting the environment,
please do not dispose of the product in the
house-hold waste at the end of its useful life.
Disposal can take place at a Braun Service Centre
or at appropriate collection points provided in your
country.
Subject to change without notice.
Guarantee
We grant a 2 year guarantee on the product
commencing on the date of purchase. Within the
guarantee period we will eliminate any defects in
the appliance resulting from faults in materials or
workmanship, free of charge either by repairing or
replacing the complete appliance at our discretion.
This guarantee extends to every country where this
appliance is supplied by Braun or its appointed
distributor.
This guarantee does not cover: damage due to
improper use, normal wear or use as well as
defects that have a negligible effect on the value or
operation of the appliance. The guarantee becomes
void if repairs are undertaken by unauthorised
persons and if original Braun parts are not used.
To obtain service within the guarantee period, hand
in or send the complete appliance with your sales
receipt to an authorised Braun Customer Service
Centre.
For UK only:
This guarantee in no way affects your rights under
statutory law.