LENCO DVP-1200T Manuel Utilisateur page 30

1. Press POWER to switch the unit on or off. The switch
indicator will light red and the unit will go to the mode last
used and stored in memory.
2. Press DVD/TV/AV to select your desired mode. When
switching the mode, the DVD player can memorize the
present playing point.
3. Press VOLUME UP/DOWN to raise or lower the sound
level Also used to make picture adjustments in the picture
select mode.
4. Each time Picture is pressed, the on screen picture
adjustment display cycles through adjustment bars for
VOLUME, CONTRAST, BRIGHTNESS, COLOR and
TINT. Then use VOLUME UP/DOWN to raise or lower the
level. This display will automatically turn off if no
adjustments are made within about 6 seconds, or if any
other button is pressed.
5. Press MUTE to cut off all sound; pressing this button again
restores sound to the previously set level. MUTE may also
be released by pressing the VOLUME UP/DOWN.
6. Press SRS 3D to activate surround sound with the
indicator on.
J. Watching TV
29