Appendix; Controlling A Tv With The Supplied Remote Control; Setting Up The Remote To Control Your Tv - Pioneer BCS-SB616 Mode D'emploi

Appendix

64
Controlling a TV with
the Supplied Remote
Control
You can control your TV using the buttons below.
TV Control
Buttons
By pressing
1 (TV POWER)
INPUT
CH +/–
VOL +/–
,
Note
Depending on the unit being connected, you
may not be able to control your TV using some
of the buttons.
6
You can
Turn the TV on or of.
Switch the TV's input source
between the TV and other
input sources.
Scan up or down through
memorized channels.
Adjust the volume of the
TV.
Setting up the remote to
control your TV
You can operate your TV with the supplied remote
control.
If your TV is listed in the table below, set the
appropriate manufacturer code.
1. While holding down 1 (TV POWER) button,
and press the manufacturer code for your
TV with the numerical buttons (see the table
below).
Manufacturer
Pioneer
Sony
Panasonic
Samsung
LG
2. Release the 1 (TV POWER) button to complete
setting.
Depending on your TV, some or all buttons may not
function on the TV, even after entering the correct
manufacturer code. When you replace the batteries
of the remote, the code number yo have set may
be reset to the default setting. Set the appropriate
code number again.
Code Number
1 (Default)
2, 3
4, 5
6, 7
8, 9