Parameters And Specifications - LENCO DVP-1210 Mode D'emploi

4. Parameters and specifications

Electronical parameters
Item
Power requirements
Power consumption
Operating humidity
Output
System
Laser
Signal system
Frequency response
Signal-to-noise ratio
Dynamic range
Note: Design and specifications are subject to change prior notice.
Battery Parameters
Battery Specifications:
Output: 7.4V
Charge/Discharge Time:
Standard charge time: 3h ~ 4h
Storage and work circumstances:
1. Storage circumstances
6 months
1 week
2. Work circumstances
Standard charge
Standard discharge
5. Guarantee
Lenco offers service and warranty in accordance with the European law, which means that in case of repairs
(both during and after the warranty period) you should contact your local dealer.
Important note: It is not possible to send products that need repairs to Lenco directly.
Important note: If this unit is opened or accessed by a non-official service center in any way, the warranty
expires.
This device is not suitable for professional use. In case of professional use, all warranty obligations of the
manufacturer will be voided.
VIDEO OUT
AUDIO OUT
: Semiconductor laser, wavelength 650 nm
: NTSC/PAL
: 20Hz to 20 kHz (1dB)
: More than 80 dB (ANALOG OUT connectors only)
: More than 85 dB (DVD/CD)
Temperature
-20 °C ~ +45 °C
-20 °C ~ +65 °C
Temperature
0 °C ~ +45 °C
-20 °C ~ +65 °C
Standard requirement
: AC 1 00-240 V, 50/60 Hz/DC 9-12V
: <12W
: 5 % to 90 %
: 1 Vp-p (75Ω)
: 1.2 Vrms (1 KHz, 0dB)
Humidity
65 ± 20%
65 ± 20%
Humidity
65 ± 20%
65 ± 20%