Parameters And Specifications - LENCO MES-212 Mode D'emploi

4 Parameters and specifications

Electronical parameters
Item
Power consumption
Operating humidity
VIDEO OUT
Output AUDIO OUT
Audio
System
Laser
Signal system
Frequency response
Signal-to-noise ratio
Dynamic range
Note: Design and specifications are subject to change prior notice.
5 Guarantee
Lenco offers service and warranty in accordance with the European law, which means that in case
of repairs (both during and after the warranty period) you should contact your local dealer.
Important note: It is not possible to send products that need repairs to Lenco directly.
Important note: If this unit is opened or accessed by a non-official service center in any way, the
warranty expires.
This device is not suitable for professional use. In case of professional use, all warranty
obligations of the manufacturer will be voided.
6 Disclaimer
Updates to Firmware and/or hardware components are made regularly. Therefore some of the
instruction, specifications and pictures in this documentation may differ slightly from your
particular situation. All items described in this guide for illustration purposes only and may not
apply to particular situation. No legal right or entitlements may be obtained from the description
made in this manual.
Standard requirement
: <10W
: 5% to 90%
:1 Vp-p (75 Ω)
: 1.2 Vrms (1 KHz, 0 dB)
:Speaker: 1WX2, Headphones output
:Semiconductor laser, wavelength 650 nm
:NTSC/PAL
: 20Hz to 20 kHz(1 dB)
:More than 80 dB (ANALOG OUT connectors only)
:More than 85 dB (DVD/CD)
13