Safety Decal - Regency Classic I1205M Manuel D'installation Et D'utilisation

safety decal

4 |
This is a copy of the label that accompanies each
I1205S Wood Insert. We have printed a copy
of the contents here for your review.
NOTE: Regency units are constantly being
improved. Check the label on the unit and if
there is a difference, the label on the unit is
the correct one.
LISTED FACTORY BUILT FIREPLACE INSERT
CERTIFIED FOR USE IN CANADA AND U.S.A.
MODEL: I1200S
TESTED TO:
ULC S628-M93 / UL 1482-1998 / ULC S627-00 / UL 737-2000
INSTALL AND USE ONLY IN ACCORDANCE WITH THE MANUFACTURER'S INSTALLATION AND OPERATING INSTRUCTIONS. INSTALL AND USE ONLY
IN MASONRY FIREPLACE OR FACTORY BUILT FIREPLACE.
CONTACT LOCAL BUILDING OR FIRE OFFICIALS ABOUT RESTRICTIONS AND INSTALLATION INSPECTION IN YOUR AREA.
ADJACENT SIDEWALL A) 15in / 380mm
MANTLE B) 20in / 510mm
TOP FACING C 14in / 355 mm
SIDE FACING D) 7.375in / 185mm
COMPONENTS REQUIRED FOR INSTALLATION: 5.5" (140mm) or 6" (152mm)STAINLESS STEEL LINER.
STANDARD ADAPTOR (171-932) OR OFFSET ADAPTOR (171-936).
OPTIONAL COMPONENT: FAN (170-915), ELECTRICAL RATING: VOLTS 115, 60 HZ, 0.6 AMPS, SCREEN DOOR (846-101)
DO NOT REMOVE BRICKS OR MORTAR IN MASONRY FIREPLACE. FOR USE WITH SOLID WOOD FUEL ONLY. DO NOT USE GRATE
OR ELEVATE FIRE. BUILD WOOD FIRE DIRECTLY ON HEARTH. OPERATE WITH FEED DOOR CLOSED, OPEN TO FEED FIRE ONLY.
REPLACE GLASS ONLY WITH CERAMIC GLASS (5MM). INSPECT AND CLEAN CHIMNEY FREQUENTLY. UNDER CERTAIN CONDITIONS
OF USE CREOSOTE BUILDUP MAY OCCUR RAPIDLY. DO NOT OVERFIRE, IF INSERT GLOWS YOU ARE OVER-FIRING.
2017 2018 2019 2020 2021
DATE OF MANUFACTURE
MADE IN CANADA
Part #: 918-666c
Colour: Black on grey, except for selected items which are printed red.
Size: File is at 100%. 9.58" W x 3.11" H
Apr. 26/07: Created artwork to be 100% for printing.
Apr. 7/11: Updated yr. of manufacture/ added 5.5" liner
Oct.3/13: Rev. A - Updated yr of manufacture
Nov.25/14: Rev. B - Updated ETL logo
Apr. 29/16: Rev. C - Updated yrs of manufacture + removed 1990 EPA info
Feb. 14/17: Rev. D - moved location of serial #
4 | I1205
MINIMUM CLEARANCES TO COMBUSTIBLE MATERIALS (MEASURED FROM INSERT BODY)
INSTALL ONLY ON A NON-COMBUSTIBLE HEARTH RAISED (F) 1.5IN / 38MM
ABOVE AN ADJACENT COMBUSTIBLE FLOOR. COMBUSTIBLE FLOOR
MUST BE PROTECTED BY NON-COMBUSTIBLE MATERIAL EXTENDING
(E) 16 IN / 405MM TO FRONT AND (G) 8IN / 205MM TO SIDES FROM FUEL
DOOR.
JAN FEB MAR
DO NOT REMOVE THIS LABEL
REPORT NO. 632-3198 (SEPT.1993)
APR MAY JUN JUL AUG SEPT OCT
CAUTION
HOT WHILE IN OPERATION
MANUFACTURED BY: DO NOT TOUCH. KEEP CHILDREN,
FPI FIREPLACE PRODUCTS
CLOTHING AND FURNITURE AWAY.
INTERNATIONAL LTD.
6988 VENTURE ST.
CONTACT MAY CAUSE SKIN BURNS.
DELTA, BC V4G 1H4
READ ABOVE INSTRUCTIONS.
918-666d
Serial No./ No de série
NOV DEC
326