MovingPeople YeS Série Manuel D'utilisation page 53

010408020
Seat with electric tilt adjustment
The seat part of your wheelchair can
be set at an angle that is comfortable
for you. In this adjustment the angle of
the entire seating system is tilted with
respect to the bottom part of the chair.
Also, this adjustment can be used to
tilt the seating system backward, to
facilitate getting out.
For each degree that the seat is
tilted backward, the seat height is
raised by approximately 5 mm (1/4").
Adjusting with 'DX' control:
•
Switch on the electrical wheelchair.
•
On the control panel of the
controller press the symbol for the
tilting adjustment of the seating
system. The light of the key should
now go on.
The wheelchair can no longer drive.
•
Now move the joystick to the front:
the seating system will tilt forward.
Or move the joystick to the back:
the seating system will tilt backward.
•
Press the symbol once more to
switch on the function as soon as
the desired tilting angle has been
reached.
Adjusting with 'Shark' control:
See 'Seat with electric height
adjustment'.
¨
Operating instructions
010408030
Backrest with electric angle
adjustment
For optimal seating comfort, you can
adjust the angle of the backrest
yourself. This is done using continuous
adjustment.
Adjusting with 'DX' control:
•
Switch on the electrical wheelchair.
•
On the control panel of the
controller press the symbol for the
angle adjustment of the backrest of
the seating system.
The light of the key should now go
on.
The wheelchair can no longer drive.
•
Now move the joystick to the front:
the backrest will tilt forward.
Or move the joystick to the back:
the backrest will tilt backward.
•
Press the symbol once more to
switch on the function as soon as
the desired angle has been
reached.
Adjusting with 'Shark' control:
See 'Seat with electric height
adjustment'.
53