MovingPeople YeS Série Manuel D'utilisation page 52

Operating instructions
3.13 Electric adjustments
The Beatle / Puma may be equipped
with electric (optional) adjustments,
which can be operated from the
controller.
The following electric adjustments may
have been provided:
•
Seat with electric height adjustment
•
Seat with electric tilt adjustment
•
Backrest with electric angle
adjustment
•
Leg-rest with electric angle
adjustment
With the DX version, the keys intended
for the operation of the electric
adjustments are standard Sharky
mounted on the controller panel.
With the Shark version, with a maximal
of two options, you can choose
between various adjustment options,
you have to push the adjustment key
(J) several times.
Remark:
When you drive up or down a slope of
more than 4 degrees, you must put all
electric adjustments back into the
original position.
Seat with electric height
adjustment
The height of the whole seating
system of the Beatle / Puma you can
adjust electrically yourself.
As soon as the seating system has
been raised a couple of centimetres,
the lamp in the on/off switch will start
blinking. This is to indicate that the
wheelchair can now only be driven at
half speed.
Therefore, while you are adjusting the
seating system, do not confuse the
blinking on/off light with the diagnostic
function of this lamp.
52
010408010
Adjusting with 'DX' control:
1. Switch on the electrical wheelchair.
2. On the control panel of the
controller press the symbol for the
height adjustment of the seating
system.
The light of the key should now go
on.
The wheelchair can no longer drive.
3. Now move the joystick to the front:
the seating system will be raised.
Or move the joystick to the back;
the seating system will move down.
4. Press the symbol once more to
switch on the function as soon as
the desired height has been
reached.
Adjusting with'Shark' control:
1. Switch on the wheelchair.
2. Push the adjustment key (J). The
indicator light of the key will go on.
You can no longer drive the
wheelchair.
3. Move the joystick forward: the
adjustment option moves forward,
or move the joystick backward: the
adjustment option moves
backward.
4. Push the adjustment key (J) to
switch off the adjustment function.
¨